From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Wed Aug 27 2008 - 18:48:36 ART
Chidd,
Most of these are questions you want to try to find a way to get your
proctor to answer. Two things about the Assessors:
1. They are graded by non-human scripts. The scripts suck - plain and
simple. I think I scored a 40-something on one of them and then passed the
real deal a few weeks later. Don't put too much stock in the grading. Just
leverage them as economical (relatively speaking) practice and an
opportunity to see how Cisco draws stuff, etc.
2. They are covered by the NDA. 'Nuff said.
As for reloading at the end, I've heard different things and at the end of
the day, I would only chose to do it if I had sufficient time left to go
back through and re-verify absolutely everything. I doubt personally that
the proctors do this, as it would just lengthen and potentially complicate
the grading process.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Doan
Dung Chi
Sent: Wednesday, August 27, 2008 1:17 PM
To: Cisco certification
Subject: Need some advices before taking LAB !
Dear all !
I'm prepare to take LAB in the next month. However, I have some confused
with
the way to do tasks.
1. FrameRelay:
- The question does not require to prevent redundant broadcast on frame
relay.
Should I change this ?
(Just take LAB Assessor, I change initial config on FR to prevent Redundant
Broadcast and they warning ????)
- Should I configure to ping FrameRelay Interface of Router itself ??
2. IGP:
- Should I assign the Wildcard mask bit to match exactly interface ??
For example:
Interface f0/0
ip add 192.168.2.1 255.255.255.0
Method 1:
router os 1
network 192.168.2.0 0.0.0.255 area 0
Method 2:
router os 1
network 192.168.2.1 0.0.0.0 area 0
Which method is siutable ?? Because 02 method is valid to configure OSPF
3. QoS:
- I confuse between choose MQC & Legacy. For example, to limit traffic,
question does not mention to MQC or Legacy ? What method I should use.
(Just take LAB Assessor. Tasks request to limit traffic (but not specify MQC
or Legacy). I choose MQC to do the LAB. When grading, I have no point
because
they using rate-limit). So the question is: Which method (MQC & Legacy) I
should choose if question does not specify MQC or Legacy ????
4. Others:
- Should I reload the all Routers inLAB when finishing ?? Proctor who
grading
LAB will reload the LAB ???
- With remote LAB, the connection is what I consider ?? (I take LAB
Assessor,
It's very slow connection)
I'm very happy with your advices, experts !
Chidd
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART