From: Doan Dung Chi (dungchid@gmail.com)
Date: Wed Aug 27 2008 - 16:17:12 ART
Dear all !
I'm prepare to take LAB in the next month. However, I have some confused with
the way to do tasks.
1. FrameRelay:
- The question does not require to prevent redundant broadcast on frame relay.
Should I change this ?
(Just take LAB Assessor, I change initial config on FR to prevent Redundant
Broadcast and they warning ????)
- Should I configure to ping FrameRelay Interface of Router itself ??
2. IGP:
- Should I assign the Wildcard mask bit to match exactly interface ??
For example:
Interface f0/0
ip add 192.168.2.1 255.255.255.0
Method 1:
router os 1
network 192.168.2.0 0.0.0.255 area 0
Method 2:
router os 1
network 192.168.2.1 0.0.0.0 area 0
Which method is siutable ?? Because 02 method is valid to configure OSPF
3. QoS:
- I confuse between choose MQC & Legacy. For example, to limit traffic,
question does not mention to MQC or Legacy ? What method I should use.
(Just take LAB Assessor. Tasks request to limit traffic (but not specify MQC
or Legacy). I choose MQC to do the LAB. When grading, I have no point because
they using rate-limit). So the question is: Which method (MQC & Legacy) I
should choose if question does not specify MQC or Legacy ????
4. Others:
- Should I reload the all Routers inLAB when finishing ?? Proctor who grading
LAB will reload the LAB ???
- With remote LAB, the connection is what I consider ?? (I take LAB Assessor,
It's very slow connection)
I'm very happy with your advices, experts !
Chidd
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART