From: Luan M Nguyen (luan@t3technology.com)
Date: Sun Aug 24 2008 - 00:34:29 ART
I like that one "keep it simple stupid!" :)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cisco Disco
Sent: Saturday, August 23, 2008 11:11 PM
To: Anant Tamgole
Cc: ccielab@groupstudy.com
Subject: Re: OT : CONFIG T
I seriously don't understand the logic behind using aliases...
What is the big deal if you type conf t or config t
or sir instead of show ip route
you know a command and you want to create another one to remember the one
you know and you will have to remember the alias as well as the command that
goes with it? Seems like double work to me.
Keep it simple stupid!
On Sat, Aug 23, 2008 at 9:36 PM, Anant Tamgole
<anant.tamgole@gmail.com>wrote:
> Thanks.
>
> Any specific reasons for not using.
>
> Or at the end of the lab we can clean the config by issuing 'no alias
exec
> xyz' commands.
>
>
> Anant
>
>
> On 8/23/08, Muhammad Nasim <muhammad.nasim@gmail.com> wrote:
> >
> > Yes you are but I will STRONGLY STRONGLY recommend not to use any alias
> in
> > the lab
> >
> > my 0.00002 cents
> >
> >
> > 2008/8/23 Anant Tamgole <anant.tamgole@gmail.com>
> >
> >> Hi,
> >>
> >> Are we allowed to use alias in lab.
> >>
> >> Anant
> >>
> >>
> >> On 8/23/08, Narbik Kocharians <narbikk@gmail.com> wrote:
> >> >
> >> > May be you should do the following:
> >> > alias exec GoToConfigMode conf t
> >> >
> >> >
> >> > On Fri, Aug 22, 2008 at 9:34 AM, Shahid Ansari <shahid1357@gmail.com>
> >> > wrote:
> >> >
> >> > > sorree ! dher iz nutting weed chaina zust keeding :P
> >> > >
> >> > >
> >> > > conf t = Configure terminal
> >> > > cont = no command
> >> > > confg= no command
> >> > > config t = configure terminal
> >> > >
> >> > > thenks
> >> > > sh@hid
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > On Fri, Aug 22, 2008 at 7:16 PM, Larry <cc13lab@gmail.com> wrote:
> >> > >
> >> > > > You still have to put the alias in... maybe I shoulda sent my
> alias
> >> > > script
> >> > > > to, but i didn't think that would need explaining.... And what is
> >> wrong
> >> > > > with
> >> > > > China?
> >> > > >
> >> > > >
> >> > > >
> >> > > > Rack1SW4#cont
> >> > > > Translating "cont"
> >> > > > % Unknown command or computer name, or unable to find computer
> >> address
> >> > > > Rack1SW4#confg
> >> > > > Translating "confg"
> >> > > > % Unknown command or computer name, or unable to find computer
> >> address
> >> > > > Rack1SW4#t
> >> > > > % Ambiguous command: "t"
> >> > > > Rack1SW4#config t
> >> > > > Enter configuration commands, one per line. End with CNTL/Z.
> >> > > > Rack1SW4(config)#
> >> > > > Rack1SW4(config)#alias exec sir show ip route
> >> > > > Rack1SW4(config)#alias exec s show run
> >> > > > Rack1SW4(config)#alias exec i sho ip int brie
> >> > > > Rack1SW4(config)#alias exec cc config t
> >> > > > Rack1SW4(config)#alias exec srb show run | b
> >> > > > Rack1SW4(config)#alias exec r show run | b router
> >> > > > Rack1SW4(config)#alias exec cir clear ip route *
> >> > > > Rack1SW4(config)#line con 0
> >> > > > Rack1SW4(config-line)#exec-time 0 0
> >> > > > Rack1SW4(config-line)#exit
> >> > > > Rack1SW4(config)#logging buffered 10000 debug
> >> > > > Rack1SW4(config)#no ip domain-lookup
> >> > > > Rack1SW4(config)#end
> >> > > > Rack1SW4#wr
> >> > > > Building configuration...
> >> > > > [OK]
> >> > > > Rack1SW4#
> >> > > >
> >> > > >
> >> > > > On 8/22/08, David Chances <davidchances@yahoo.com> wrote:
> >> > > > >
> >> > > > > I often get FFS - Fat Finger Syndrome at exam time. So, do
> this:-
> >> > > > >
> >> > > > > alias exec conft conf t
> >> > > > > alias exec con conf t
> >> > > > > alias exec cont conf t
> >> > > > > alias exec "RUDE WORD" conf t
> >> > > > > alias exec cinf t conf t
> >> > > > >
> >> > > > > I would recommend that you remove the 4th one before you leave
> >> your
> >> > > lab.
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > > --- On Fri, 8/22/08, Shaughn Smith <
> >> > > Shaughn.Smith@za.verizonbusiness.com
> >> > > > >
> >> > > > > wrote:
> >> > > > >
> >> > > > > > From: Shaughn Smith <Shaughn.Smith@za.verizonbusiness.com>
> >> > > > > > Subject: RE: OT : CONFIG T
> >> > > > > > To: "Larry" <cc13lab@gmail.com>, "Cisco certification" <
> >> > > > > ccielab@groupstudy.com>
> >> > > > > > Date: Friday, August 22, 2008, 8:26 AM
> >> > > > > > Hi
> >> > > > > >
> >> > > > > > Its conf t
> >> > > > > >
> >> > > > > > -----Original Message-----
> >> > > > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
> >> > > > > > On Behalf Of
> >> > > > > > Larry
> >> > > > > > Sent: Friday, August 22, 2008 2:18 PM
> >> > > > > > To: Cisco certification
> >> > > > > > Subject: OT : CONFIG T
> >> > > > > >
> >> > > > > > Does anyone else have this problem??
> >> > > > > >
> >> > > > > >
> >> > > > > > Rack1SW4#cont
> >> > > > > > Translating "cont"
> >> > > > > > % Unknown command or computer name, or unable to find
> >> > > > > > computer address
> >> > > > > > Rack1SW4#confg
> >> > > > > > Translating "confg"
> >> > > > > > % Unknown command or computer name, or unable to find
> >> > > > > > computer address
> >> > > > > > Rack1SW4#t
> >> > > > > > % Ambiguous command: "t"
> >> > > > > > Rack1SW4#config t
> >> > > > > > Enter configuration commands, one per line. End with
> >> > > > > > CNTL/Z.
> >> > > > > > Rack1SW4(config)#
> >> > > > > >
> >> > > > > > arggggggg!
> >> > > > > >
> >> > > > > >
> >> > > > > > Larry
> >> > > > > >
> >> > > > > >
> >> > > > > > Blogs and organic groups at http://www.ccie.net
> >> > > > > >
> >> > > > > >
> >> > >
> >> _______________________________________________________________________
> >> > > > > > Subscription information may be found at:
> >> > > > > > http://www.groupstudy.com/list/CCIELab.html
> >> > > > > >
> >> > > > > >
> >> > > > > > Blogs and organic groups at http://www.ccie.net
> >> > > > > >
> >> > > > > >
> >> > >
> >> _______________________________________________________________________
> >> > > > > > Subscription information may be found at:
> >> > > > > > http://www.groupstudy.com/list/CCIELab.html
> >> > > >
> >> > > >
> >> > > > Blogs and organic groups at http://www.ccie.net
> >> > > >
> >> > > >
> >> _______________________________________________________________________
> >> > > > Subscription information may be found at:
> >> > > > http://www.groupstudy.com/list/CCIELab.html
> >> > >
> >> > >
> >> > > Blogs and organic groups at http://www.ccie.net
> >> > >
> >> > >
> >> _______________________________________________________________________
> >> > > Subscription information may be found at:
> >> > > http://www.groupstudy.com/list/CCIELab.html
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> >
> >> >
> >> > --
> >> > Narbik Kocharians
> >> > CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> >> > www.MicronicsTraining
> >> > www.Net-Workbooks.com <http://www.net-workbooks.com/>
> >> > Sr. Technical Instructor
> >> >
> >> >
> >> > Blogs and organic groups at http://www.ccie.net
> >> >
> >> >
> _______________________________________________________________________
> >> > Subscription information may be found at:
> >> > http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> > --
> > Muhammad Nasim
> > Network Engineer
> > Saudi Arabia
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART