From: Lloyd Ardoin (Lloyd@TheWizKid.biz)
Date: Sat Aug 23 2008 - 19:05:58 ART
This can be found in the archives but the bottom line is that this will
take a parent policy and a child policy when applying to an Ethernet
sub-interface.
Try this link for more detail.
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a
0080114326.shtml
HTH,
Lloyd V Ardoin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
GAURAV MADAN
Sent: Friday, August 22, 2008 8:59 AM
To: Cisco certification
Subject: Shaping : FE sub-int
hi all
i know this was discusse some time back ..... but asking again for
clearifications
I am confused regarding the application of serive policies at FE
sub-interfaces :
R2 R3
|------------------------| |--------------------------------|
R1
R1 f0/0.1 connects tp R2
R1 f0/0.2 connects to R3
Simple requirement : Send not more than 1 Mbps to R2 and not more than
2 Mbps to R3
policy-map R2
class class-default
shape average 1000000
!
int f0/0.1
service-pol out R2
Class Based Weighted Fair Queueing will be applied only to the
Virtual-Access interfaces associated with an MLP bundle.
How to rectify this error ?
I already went through :
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a
0080114326.shtml
But couldnt get much out of it .
Thnx
Gaurav Madan
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART