From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Fri Aug 22 2008 - 11:32:22 ART
Rack1R5(config)#policy-map abcd
Rack1R5(config-pmap)#clas
Rack1R5(config-pmap)#class class-default
Rack1R5(config-pmap-c)#shape av 1000000
Rack1R5(config-pmap-c)#ex
Rack1R5(config)#do sh run int f00/0.1
Building configuration...
Current configuration : 96 bytes
!
interface FastEthernet0/0.1
encapsulation dot1Q 52
ip address 192.10.1.5 255.255.255.0
end
Rack1R5(config)#int f0/0.1
Rack1R5(config-subif)#ser
Rack1R5(config-subif)#service-policy o
Rack1R5(config-subif)#service-policy output abcd
Class Based Weighted Fair Queueing will be applied only to the
Virtual-Access interfaces associated with an MLP bundle.
I am using IOS 12.4 19 T train
Gaurav Madan
On Fri, Aug 22, 2008 at 7:55 PM, Larry <cc13lab@gmail.com> wrote:
> Gaurav,
>
> It works fine on my equipment, what ver of ios are you running? Also are
> there any more QOS configs which would come into play?? This problem usually
> comes into play when you are using bandwidth in the policy map but shaping
> should work fine...
>
> Enter configuration commands, one per line. End with CNTL/Z.
> Rack1R1(config)#policy-map R2
> Rack1R1(config-pmap)#class class-default
> Rack1R1(config-pmap-c)#shape average 1000000
> Rack1R1(config-pmap-c)#!
> Rack1R1(config-pmap-c)#
> Rack1R1(config-pmap-c)#int e0/0.1
> Rack1R1(config-subif)#encap
> Rack1R1(config-subif)#encapsulation dot
> Rack1R1(config-subif)#encapsulation dot1Q 100
> Rack1R1(config-subif)#servi
> Rack1R1(config-subif)#service-policy out R2
> Rack1R1(config-subif)#
> Rack1R1(config-subif)#
> Rack1R1(config-subif)#do show ver | in IOS
> Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version 12.3(14)T7,
> RELEASE SOFTWARE (fc2)
> Rack1R1(config-subif)#
>
>
>
> larry
>
>
> On 8/22/08, GAURAV MADAN <gauravmadan1177@gmail.com> wrote:
>>
>> hi all
>>
>> i know this was discusse some time back ..... but asking again for
>> clearifications
>>
>> I am confused regarding the application of serive policies at FE
>> sub-interfaces :
>>
>>
>> R2 R3
>> |------------------------| |--------------------------------|
>> R1
>>
>> R1 f0/0.1 connects tp R2
>> R1 f0/0.2 connects to R3
>>
>> Simple requirement : Send not more than 1 Mbps to R2 and not more than
>> 2 Mbps to R3
>>
>> policy-map R2
>> class class-default
>> shape average 1000000
>> !
>>
>> int f0/0.1
>> service-pol out R2
>> Class Based Weighted Fair Queueing will be applied only to the
>> Virtual-Access interfaces associated with an MLP bundle.
>>
>> How to rectify this error ?
>> I already went through :
>>
>> http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a0080114326.shtml
>>
>> But couldnt get much out of it .
>> Thnx
>> Gaurav Madan
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART