From: Zealist Hamamd (zealist@gmail.com)
Date: Wed Aug 13 2008 - 15:08:24 ART
hi
I havent tried this for external routes but similar config works fine for me
with in AS.
Kidly tell me will distance cmd with specific routes ACL will work only for
Interal Routes?? or it will change AD for all Internal Routes.
second if we use distance cmd as shown by Gaurav will it change AD for all
External Routes???
regards
On 8/13/08, Usama Pervaiz <chaudri@gmail.com> wrote:
> Ohh so if its a D EX route I cannot use an ACL to change the distance?
> This is exactly what I was trying to do. Those routes were coming in
> as D EX routes and I was trying to change the distance to 91. Other
> than using the distance eigrp <internal> <external> which will change
> the distance for all external routes there is no way I can change the
> distance of selective external routes? interesting........
>
> Usama
>
> On Wed, Aug 13, 2008 at 4:00 AM, Fahad Khan <fahad.khan@gmail.com> wrote:
> > Yes Gaurav, I totally agree with you. You cant change the distance of
> > specific external routes in EIGRP.
> >
> > regards,
> >
> >
> > On 8/13/08, GAURAV MADAN <gauravmadan1177@gmail.com> wrote:
> >>
> >> I guess what Joseph meant to say was :
> >>
> >> We can not selectively change the dstance of external EIGRP routes
> >> based on ACL ..
> >> Am i correct in this ?
> >>
> >> For external distance " distance eigrp <internal> <external> " will be
> >> applicable and we dont have to choose by acl option ..
> >>
> >> can someone throw some light on this ?
> >>
> >> Gaurav Madan
> >>
> >>
> >> On Wed, Aug 13, 2008 at 11:34 AM, GAURAV MADAN
> >> <gauravmadan1177@gmail.com> wrote:
> >> > Hi
> >> >
> >> > This works perfectly ..
> >> > Just gave a small try :
> >> >
> >> > R1 (6.0.0.1)=========(6.0.0.2) R2
> >> >
> >> > R2 sending loopback 2.2.2.2 to R1
> >> >
> >> > R2
> >> > ********
> >> > do sh run | sec eig
> >> > router eigrp 10
> >> > network 2.2.2.2 0.0.0.0
> >> > network 6.0.0.2 0.0.0.0
> >> > auto-summary
> >> > eigrp router-id 20.1.1.1
> >> >
> >> > R1
> >> > *******
> >> > do sh run | sec eig
> >> > router eigrp 10
> >> > network 6.0.0.1 0.0.0.0
> >> > distance 91 6.0.0.2 0.0.0.0 11
> >> > no auto-summary
> >> > eigrp router-id 30.1.1.1
> >> > !
> >> > Standard IP access list 11
> >> > 10 permit 2.0.0.0, wildcard bits 0.255.255.255 (3 matches)
> >> >
> >> >
> >> > do sh ip route eig
> >> > D 2.0.0.0/8 [91/130816] via 6.0.0.2, 00:03:27, GigabitEthernet0/0
> >> >
> >> > I am getting this with 91 ..
> >> >
> >> > Regarding you question about source ( shd it be router-id or link
> >> > address ) please give " show eigrp topo " and see who is sending ..
> >> >
> >> > HTH
> >> > Gaurav Madan.
> >> >
> >> > On Wed, Aug 13, 2008 at 1:51 AM, Usama Pervaiz <chaudri@gmail.com>
> >> > wrote:
> >> >> I am using Version 12.4(17a).
> >> >>
> >> >> Could you tell me where I am going wrong as it does not seem to work
> >> >> for me.
> >> >>
> >> >> Usama
> >> >>
> >> >> On Tue, Aug 12, 2008 at 4:11 PM, Fahad Khan <fahad.khan@gmail.com>
> >> >> wrote:
> >> >>> Dear Usama,
> >> >>>
> >> >>> This is possible exactly in the same manner as we configure in RIP.
> >> >>> Which
> >> >>> IOS are u using?
> >> >>>
> >> >>> regards,
> >> >>>
> >> >>> On 8/12/08, Usama Pervaiz <chaudri@gmail.com> wrote:
> >> >>>>
> >> >>>> Hello all
> >> >>>>
> >> >>>> I wanted to ask if the distance command under the eigrp process
> works
> >> >>>> like it does for rip.
> >> >>>>
> >> >>>> example:
> >> >>>> I am receiving routes from router with IP 10.10.2.2 (eigrp
> router-id
> >> >>>> 2.2.2.2) and I want to change the admin distance of routes:
> 12.12.1.1
> >> >>>> 12.12.2.2 and 12.12.3.3
> >> >>>>
> >> >>>> eigrp 5
> >> >>>> distance 91 10.10.2.2 0.0.0.0 1
> >> >>>> !
> >> >>>> access-list 1 permit 12.12.1.0 0.0.0.255
> >> >>>> access-list 1 permit 12.12.2.0 0.0.0.255
> >> >>>> access-list 1 permit 12.12.3.0 0.0.0.255
> >> >>>>
> >> >>>> will the above config change the admin distance for the respective
> >> >>>> routes? Do i have to use the router-id instead of the router ip
> >> >>>> address? I have tried the above but the distance does not change. I
> >> >>>> also tried it with
> >> >>>>
> >> >>>> distance 91 0.0.0.0 255.255.255.255 1
> >> >>>>
> >> >>>> but still nothing.
> >> >>>>
> >> >>>> Any thoughts? anyone...anyone....Bueller.....
> >> >>>>
> >> >>>> Thanks.
> >> >>>>
> >> >>>>
> >> >>>> Blogs and organic groups at http://www.ccie.net
> >> >>>>
> >> >>>>
> >> >>>>
> _______________________________________________________________________
> >> >>>> Subscription information may be found at:
> >> >>>> http://www.groupstudy.com/list/CCIELab.html
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>
> >> >>>
> >> >>>
> >> >>> --
> >> >>> FAHAD KHAN
> >> >>>
> >> >>> BE Computer Systems NED,
> >> >>>
> >> >>> CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE (Written)
> >> >>>
> >> >>> Systems Support Engineer, Premier Systems (Pvt) limited,
> >> >>>
> >> >>> Karachi, Pakistan
> >> >>>
> >> >>> 92-321-2370510.
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> -----------------------------------------------------
> >> >> You're the only one who can hold your head up high,
> >> >> Shake your fist at the gates saying,
> >> >> "I have come home now!"
> >> >>
> >> >> Fetch me the spirit, the son and the father,
> >> >> Tell them their pillar of faith has ascended.
> >> >>
> >> >> "It's time now!
> >> >> My time now!
> >> >> Give me my
> >> >> Give me my own wings!"...
> >> >> -------------------------------------------------------
> >> >>
> >> >>
> >> >> Blogs and organic groups at http://www.ccie.net
> >> >>
> >> >>
> _______________________________________________________________________
> >> >> Subscription information may be found at:
> >> >> http://www.groupstudy.com/list/CCIELab.html
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >
> >
> >
> >
> > --
> > FAHAD KHAN
> >
> > BE Computer Systems NED,
> >
> > CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE (Written)
> >
> > Systems Support Engineer, Premier Systems (Pvt) limited,
> >
> > Karachi, Pakistan
> >
> > 92-321-2370510.
>
>
>
> --
> -----------------------------------------------------
> You're the only one who can hold your head up high,
> Shake your fist at the gates saying,
> "I have come home now!"
>
> Fetch me the spirit, the son and the father,
> Tell them their pillar of faith has ascended.
>
> "It's time now!
> My time now!
> Give me my
> Give me my own wings!"...
> -------------------------------------------------------
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- zealist@gmail.comBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:30 ART