From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Tue Jul 29 2008 - 03:57:25 ART
HI Group
I wanted a small clearification :
If my requirement says " i have to deny upd packets going tp dest port
1434 " and i am not supposed to use the ACL for it .
I plan to do this as :
Rack1R5(config)#do sh run | inc ip nb
ip nbar port-map custom-10 udp 1434
Then I will match this in class-map " match protocol custom-10 " and
finally drop in policy-map .
Am I correct in my approach ?
Question
***********
1) Is this udp port number that i specify ; the dest port number ?
2) When I give :
Rack1R5(config)#ip nbar port-map ?
custom-01 Custom protocol custom-01
custom-02 Custom protocol custom-02
custom-03 Custom protocol custom-03
custom-04 Custom protocol custom-04
custom-05 Custom protocol custom-05
custom-06 Custom protocol custom-06
custom-07 Custom protocol custom-07
custom-08 Custom protocol custom-08
custom-09 Custom protocol custom-09
custom-10 Custom protocol custom-10
Whatever I choose ; I get that configured as custom-10
Rack1R5(config)#ip nbar port-map custom-1 udp 1001
Rack1R5(config)#do sh run | inc ip nbar
ip nbar port-map custom-10 udp 1001
3) Also ; I find only "custom-10" as only option in match protocol ....
If I have to do this for multiple ports ( i know i can match upto 16
in one custom itself ) then do we have some other options ?
Thnx in advance
Gaurav Madan.
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART