Re: pvst partitioned domain issue

From: Igor Manassypov (imanassypov@rogers.com)
Date: Mon Jul 28 2008 - 16:16:08 ART

• Next message: John Scott: "RE: anyone had a bootcamp with Anderson Alves (Andri)"
• Previous message: Shawn Zandi: "Re: pvst partitioned domain issue"
• Maybe in reply to: Igor Manassypov: "pvst partitioned domain issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

they have no such option under their interfaces. I checked the doc-cd for their 12.2 ios on the 7600, which is quite bizzare since 3750 for example has got that...

Shawn Zandi <szmetal@gmail.com> wrote: They have to enable:

l2protocol-tunnel point-to-point (for pagp and lacp to work)

* Caution To avoid a network failure, make sure that the network is a
point-to-point topology before you enable tunneling for PAgP, LACP, or
UDLD packets

Switch(config-if)# l2protocol-tunnel point-to-point pagp

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swtunnel.html

Sincerely,
Shawn Zandi
Routing, Switching & Security Consultant
CCIE (Routing & Switching) - MCSE

eLINEAR SOLUTIONS ME FZ LLC
Dubai Internet City - Building 13
web: http://www.shafagh.com
email: shafagh@shafagh.com
Fax: +971 4 390 8548

Blogs and organic groups at http://www.ccie.net

• Next message: John Scott: "RE: anyone had a bootcamp with Anderson Alves (Andri)"
• Previous message: Shawn Zandi: "Re: pvst partitioned domain issue"
• Maybe in reply to: Igor Manassypov: "pvst partitioned domain issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART