From: Peter Stephan (engpeter@gmail.com)
Date: Sat Jul 26 2008 - 19:00:28 ART
GS,
Does anyone know how to use "eigrp stub leak-map"? I didn't work calling
route-map in the eigrp stub.
I found it while practicing the cmd, however never found anything about it
in DocCD.
eigrp stub
To configure a router as a stub using Enhanced Interior Gateway Routing
Protocol (EIGRP), use the eigrp stub command in router configuration mode.
To disable the EIGRP stub routing feature, use the no form of this command.
eigrp stub [receive-only | connected | static | summary | redistributed]
no eigrp stub [receive-only | connected | static | summary | redistributed]
Syntax Description
receive-only
(Optional) Sets the router as a receive-only neighbor.
connected
(Optional) Advertises connected routes.
static
(Optional) Advertises static routes.
summary
(Optional) Advertises summary routes.
redistributed
(Optional) Advertises redistributred routes from other protocols and
autonomous systems.
Thanks,
Peter.
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART