From: Joseph Brunner (joe@affirmedsystems.com)
Date: Tue Jul 22 2008 - 11:32:25 ART
Yes, when the update source and peer to ip don't jive.
Can you just write an acl and capture all "tcp any any eq 179 log" and just
wait to see what address trys to peer with you?
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Lee
Glenn (leglenn)
Sent: Tuesday, July 22, 2008 10:12 AM
To: ccielab@groupstudy.com
Subject: BGP Mystery
Here is the scenario, hopefully someone out there can help me solve
this:
You are peering your router to an ISP router, you have total control
over your router, but have no view into the ISPs router or configs, and
you cannot call your ISP for help. You set up what you believe to be
the proper peer address and remote-as but the peer session will not come
up. The one and only debug message you get is below, 2.2.2.2 is the
router you are trying to peer too:
BGP: 2.2.2.2 open active delayed 33704ms (35000ms max, 28% jitter)
Anyone run into this?
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:56 ART