From: Lee Glenn (leglenn) (leglenn@cisco.com)
Date: Tue Jul 22 2008 - 11:25:51 ART
Oh forgot to add that part, yes you can ping the directly connected peer
address with 1-3ms response.
-----Original Message-----
From: Shaughn Smith [mailto:Shaughn.Smith@za.verizonbusiness.com]
Sent: Tuesday, July 22, 2008 10:22 AM
To: Lee Glenn (leglenn); ccielab@groupstudy.com
Subject: RE: BGP Mystery
Can you ping the peer address, if so what kind of responses are you
getting ?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Lee Glenn (leglenn)
Sent: Tuesday, July 22, 2008 4:12 PM
To: ccielab@groupstudy.com
Subject: BGP Mystery
Here is the scenario, hopefully someone out there can help me solve
this:
You are peering your router to an ISP router, you have total control
over your router, but have no view into the ISPs router or configs, and
you cannot call your ISP for help. You set up what you believe to be
the proper peer address and remote-as but the peer session will not come
up. The one and only debug message you get is below, 2.2.2.2 is the
router you are trying to peer too:
BGP: 2.2.2.2 open active delayed 33704ms (35000ms max, 28% jitter)
Anyone run into this?
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:56 ART