From: Hafiz Ahmed (ruben.bd@gmail.com)
Date: Tue Jul 22 2008 - 00:54:34 ART
Hi Frnds I need ur assiatance .Question is
Multicast will be required on R1 as well sometime in the future , make sure
that R1 will be able to receive multicast traffic without
enabling multicast on the routers in between config R4 as a static
rendezvous point.I can ping the multicast grp addr from R3 but i cannt ping
from R1.
So looking for your cooperation to resolve this problem.
On R4 Pim Sparse is enable on Fastethernet & Serial
On R3 PIm Sparse is enable on Serial ,Loopback & Tunnel0
On R1 Pim Sparse is enable on Loopback & Tunnel0
Diagram
R1-----SW-----R3------[FR]------------R4[RP for 224.2.2.2]
On R3
interface loopback0
ip add 12.12.3.3 255.255.255.255
ip pim spares-mode
!
interface tunnel 0
ip unnumbered fa0/1
ip pim sparse-mode
tunnel source loopback0
tunnel destination 12.12.1.1
!
ip mroute 12.12.1.1 255.255.255.255 tunnel 0
On R1
ip multicast-routing
ip pim rp-address 12.12.4.4
!
interface loopback 0
ip add 12.12.1.1 255.255.255.255
ip pim sparse-mode
!
interface tunnel 0
ip unnumbered fa0/1
ip pim sparse-mode
tunnel source loopback 0
tunnel destination 12.12.3.3
Regards,
Hafiz Ahmed
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:56 ART