From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Sun Jul 20 2008 - 04:43:08 ART
Hi All ,
I am having problem in using "distance " in OSPF . PLease see my scenario :
From ospf database
**************************
Summary Net Link States (Area 1)
Link ID ADV Router Age Seq# Checksum
139.1.2.0 150.1.2.2 879 0x80000002 0x00EB25
139.1.6.0 150.1.1.1 1065 0x80000002 0x007489 <=====
139.1.6.0 150.1.2.2 1129 0x80000002 0x004C7F <=====
139.1.7.0 150.1.1.1 1065 0x80000002 0x006993 <======
139.1.7.0 150.1.2.2 1129 0x80000002 0x004189 <======
139.1.11.0 150.1.1.1 812 0x80000002 0x009574
Routing table
*****************
These are reached via R2 (150.1.2.2)
O IA 139.1.6.0 [110/130] via 139.1.25.2, 00:04:36, Serial0/0/0.25
O IA 139.1.7.0 [110/130] via 139.1.25.2, 00:04:36, Serial0/0/0.25
Task : 139.1.6.0 and 139.1.7.0 to be preferred via R1 (150.1.1.1)
*******
I did :
Standard IP access list THROUGH-R1
10 permit 139.1.6.0
20 permit 139.1.7.0
Rack1R5(config-router)#do sh run | inc distance
distance 109 150.1.1.1 0.0.0.0 THROUGH-R1
Routing Table (still the same )
****************
O IA 139.1.6.0 [110/130] via 139.1.25.2, 00:00:03, Serial0/0/0.25
O IA 139.1.7.0 [110/130] via 139.1.25.2, 00:00:03, Serial0/0/0.25
PLease let me know what am I missing . What I know is that in case of
OSPF distance command we need to go into ospf database and see the
advertising router and accordingly use the distance command .
Thnx
Gaurav Madan.
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:56 ART