From: Dennis Worth (dennis.worth@gmail.com)
Date: Fri Jul 18 2008 - 15:02:01 ART
akyccie,
Point your source from where you can actually generate traffic R1,R2 etc and
also the destination pointing to port that has and end router i.e R1,R2 etc.
Then Debug it.
HTH
On Fri, Jul 18, 2008 at 10:45 AM, akyccie <akyccie@gmail.com> wrote:
> Is there any way to verify it
>
> Source switch
>
> Switch(config)# vlan 901
> Switch(config-vlan)# remote span
> Switch(config-vlan)# end
> Switch(config)# monitor session 1 source interface g0/1
> Switch(config)# monitor session 1 destination remote vlan 901
> Switch(config)# end
>
> Destination switch
>
> Switch(config)# vlan 901
> Switch(config-vlan)# remote span
> Switch(config-vlan)# end
> Switch(config)# monitor session 1 source remote vlan 901
> Switch(config)# monitor session 1 destination interface gigabitethernet0/8
> Switch(config)# end
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
-- Dennis Worth
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART