From: Peter Stephan (engpeter@gmail.com)
Date: Fri Jul 18 2008 - 15:01:41 ART
Here you go:
show monitor [session {session_number | all | local | range list | remote}
[detail]] [ | {begin | exclude | include} expression]
Switch# show monitor
Session 1
---------
Type : Local Session
Source Ports :
RX Only : Fa0/1
Both : Fa0/2-3,Fa0/5-6
Destination Ports : Fa0/20
Encapsulation : Replicate
Ingress : Disabled
Session 2
---------
Type : Remote Source Session
Source VLANs :
TX Only : 10
Both : 1-9
Dest RSPAN VLAN : 105
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
akyccie
Sent: Friday, July 18, 2008 9:45 PM
To: ccielab@groupstudy.com
Subject: RSPAN
Is there any way to verify it
Source switch
Switch(config)# vlan 901
Switch(config-vlan)# remote span
Switch(config-vlan)# end
Switch(config)# monitor session 1 source interface g0/1 Switch(config)#
monitor session 1 destination remote vlan 901 Switch(config)# end
Destination switch
Switch(config)# vlan 901
Switch(config-vlan)# remote span
Switch(config-vlan)# end
Switch(config)# monitor session 1 source remote vlan 901 Switch(config)#
monitor session 1 destination interface gigabitethernet0/8 Switch(config)#
end
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART