From: Huan Pham (Huan.Pham@peopletelecom.com.au)
Date: Tue Jul 15 2008 - 21:47:21 ART
With the very high failure rates of CCIE lab exams, Cisco is worried for
its equipments safety. Even keyboards and monitors in the lab are hammer
proof.
So "no touching" is the rule, same as in stript shows ;-)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jason Madsen
Sent: Wednesday, 16 July 2008 5:23 AM
To: B R
Cc: ccielab@groupstudy.com
Subject: Re: Lab question....
haven't sat in a lab before, but i do know that we prohibited from even
touching the rack...or at least that's what i've heard.
On Tue, Jul 15, 2008 at 1:18 PM, B R <modularie@gmail.com> wrote:
> If it breaks the NDA then please don't answer my question.
>
>
>
> I've noticed on a few of the practice labs that at the beginning your
> told to assemble and cable the equipment per the diagram. In the
> actual test do you have to wire everything yourself or is it already
set up for you?
>
>
>
> Again if answering this question is a no-no than I apologize.
>
>
>
> Mod
>
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART