From: Larry (cc13lab@gmail.com)
Date: Sun Jul 13 2008 - 09:56:41 ART
Raj,
Here is a page that will give you a list of books/readings as well as some
other valuable resources. http://www.internetworkexpert.com/resources/. You
can do most of your preperation with dynamips but like matt said you will
need a good machine. Here is where you will find all the information for
that: http://7200emu.hacki.at/. <http://7200emu.hacki.at/> You could also
buy 4 switches and tie them into your dynamips topology basically giving you
full functionality.
I have a dynamips .net file for the IPexpert topology if you need it, just
unicast me.
hth
larry
On Sun, Jul 13, 2008 at 3:48 AM, Raj V <ccieraj@yahoo.com> wrote:
> Hi David,
> I think you are right I didn't put the ports in the
> right VLAN.But still router should show that ICMP packets are being sent
> out
> using DEBUG command-but ICMP was not sent out from the router.So that makes
> me
> wonder whether it was something else.
> Thanks for your response and I think it
> was VLAN in lan.I gave my exam in Sydney.
> Regards
> Ashish Saxena
>
>
> -----
> Original Message ----
> From: David Chances <davidchances@yahoo.com>
> To: Raj V
> <ccieraj@yahoo.com>
> Sent: Sunday, July 13, 2008 3:49:26 PM
> Subject: Re:
> Guidance for CCIE Lab preparation and Not able to ping BB1 from Router
>
>
> Hi
> Raj
>
>
> I had the same problem. Turned out I have to put the port into the right
> VLAN.. I faled my attempt in June, in Brussels to. Where do you do yours?
> Regards,
>
>
>
> --- On Sat, 7/12/08, Raj V <ccieraj@yahoo.com> wrote:
>
> From: Raj V
> <ccieraj@yahoo.com>
> Subject: Guidance for CCIE Lab preparation and Not able to
> ping BB1 from Router
> To: ccielab@groupstudy.com
> Date: Saturday, July 12, 2008,
> 8:38 PM
>
>
> Hi,
> I recently gave my CCIE lab exam and unfortunately I was
> not
> successful and now I have started my search for a more concise study for
> my
> next attempt.I used Cisco CCIE Routing and Switching Edition 3 and CBT
> Nuggets
> for my preparation primarily and as reference I used Cisco
> online
> documents
> and Sybex CCIE book.I am interested in knowing more on the reference
> material
> for my CCIE R&S exam.Which are the recommended books,CBTs,Labs etc.
> I
> recently
> subscribed to the IPEXPERT's BLS training also.Although I have few
> equipments
> at home but it seems for IPEXPERT I would need to buy lot more and
> did anyone
> of you used Dynagen with IPEXPERT's labs.
> Probably this is a
> very basic
> question (or may be its my ignorance).In one of the question in the
> exam I
> found that I was not able to ping the directly connected neigbour from
> my
> router and the neigbour was BB1.I did debug on my router and found that my
> router was not sending the ICMP packets out to ping, the interface was not
> shut.Did anyone of you faced similar issues on your exam?
> Thanks in advance
> and I joined this group yesterday and I have already started to realize
> that
> this group will be the integral part of my CCIE Lab
> preparation hereon and
> hopefully I will be able to get through in my next attempt.
> Regards
> Raj
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART