From: Scott Morris (swm@emanon.com)
Date: Thu Jul 03 2008 - 09:04:33 ART
You can't access them directly (e.g. only device being connected to) or you
can't access them simultaneously? (e.g. you can get to the first 16
connections, but it ends after that?)
For the first one, the port numbering should be perfectly fine unless
something is misconfigured or dysfunctional on the card/cabling. Those HD68
connectors can be a pain if the pins get messed up.
For the latter, it depends on how many total VTY ports you have configured,
or are allowed on the box to begin with.
Newer routers allow for some obscene amount of VTY ports (1181 if memory
serves) but older routers do not, hence a limitation and irritation!
HTH,
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
James Lee@TPE@TS
Sent: Thursday, July 03, 2008 5:10 AM
To: GS CCIE-Lab
Subject: HELP: Last few lines can NOT be accessed using 3640 with NA-32M
Hi,
Let me know if any one know my problem experienced as following:
I can NOT access last 6 lines using 3640 with NM-32A as terminal server.
Thanks for help.
Best regards,
James Lee
2008/7/3
****************************************************************************
*
This email and all contents are subject to the following disclaimer:
http://www.datacraft-asia.com/disclaimer
****************************************************************************
*
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART