From: Jason Madsen (madsen.jason@gmail.com)
Date: Wed Jul 02 2008 - 13:55:10 ART
There's also the Virtual PC (VPC) option that is slightly different than
creating a loopback and then referencing it in a cloud. Apparently you can
add up to 9 Virtual PCs and it's supposed to use less CPU resources than
creating loopbacks manually. See the below link if you're interested. The
section is quite a ways down the page at "*Adding Hosts/PCs to GNS3*". He
used to have a great section on manually adding loopbacks, but it appears he
replaced it with this VPC section. Anyway, check it out if you're
interested:
http://subnettingmadeeasy.blogspot.com/2008/06/adding-hostspcs-to-gns3-vpcs.html
On Wed, Jul 2, 2008 at 10:21 AM, Sushil Pokharel <sushilpok@gmail.com>
wrote:
> Still waiting for the kind suggestions.......
>
>
>
>
> On Wed, Jul 2, 2008 at 12:46 AM, Sushil Pokharel <sushilpok@gmail.com>
> wrote:
>
> > Hi All,
> >
> > I am using GSN3 in my laptop running windows vista Home premium. I want
> to
> > connect the virtual router port with the microspoft loopback. But when I
> > click
> > "Network device list" , I get the following error:
> >
> >
> > Network adapters on this machine:
> > Unable to create lock file "c7200_i0_l
> > VM default: unable to create instance!
> > C7200: unable to create instance!
> >
> > Use as follows:
> > F0/0 = NIO_gen_eth:\Device\NPF_{...}
> >
> > Press any key to continue . . .
> >
> >
> >
> > Waiting for your quick response.
> >
> > Thanks
> >
> > Sushil
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART