CRC Error

From: vineesh viswanath (vineesh_viswanath@hotmail.com)
Date: Sat Jun 28 2008 - 05:15:53 ART

• Next message: Christian Zeng: "Re: IE topology Dynamips and Real cisco gear question."
• Previous message: raul raul: "BGP max path"
• Next in thread: L Pham: "Re: CRC Error"
• Maybe reply: L Pham: "Re: CRC Error"
• Maybe reply: vineesh viswanath: "RE: CRC Error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all

 I am getting CRC error from the I/F connected to my SAN Box.

 Primary is connected to 6513 and Secondary on 4509 [DR site] , Sync is setup
across the SAN Devices.

 SAN architect asked me to configure 100meg Full on both the site .

 SAN fabric is connected to the patch with a cat6 cable and from there to the
6513 a cat5e , will there be any issue due to this factor ?
interface GigabitEthernet10/25 description Centera Server Primary switchport
switchport access vlan 10 switchport mode access switchport nonegotiate no ip
address speed 100 duplex full

I have notices more runts and Giant packets on the i/f traffic

Regards

Vineesh

• Next message: Christian Zeng: "Re: IE topology Dynamips and Real cisco gear question."
• Previous message: raul raul: "BGP max path"
• Next in thread: L Pham: "Re: CRC Error"
• Maybe reply: L Pham: "Re: CRC Error"
• Maybe reply: vineesh viswanath: "RE: CRC Error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:23 ART