From: Tyson Scott (tscott@ipexpert.com)
Date: Mon Jun 16 2008 - 11:02:20 ART
You could still try to do a password recovery to see if it can
recover. Where you are is the last step befor the nvram is loaded so
it is worth testing.
On Sun, Jun 15, 2008 at 11:13 AM, Muhammad Nasim
<muhammad.nasim@gmail.com> wrote:
> It was a power shut down in the building and then after few mintues power
> was up before that the switch was working fine.
>
> Right now there is no configuration on the switch so confgiuration can not
> be a issue
>
>
>
> 2008/6/15 L Pham <ccie17030@gmail.com>:
>
>> What happen BEFORE the restart ?
>>
>> On Sun, Jun 15, 2008 at 7:58 AM, Muhammad Nasim
>> <muhammad.nasim@gmail.com> wrote:
>> > Dear All,
>> >
>> > I have switch 3560 with 48 ports with POE. It was working fine but now
>> after
>> > a restart it is hang and below is the output where it hangs. Does this
>> > happens to anyone. I already changed the image even formated the flash
>> and
>> > copy new image and boot but no luck still hanging on the same output.
>> >
>> > Below is the output.
>> >
>> > Initializing flashfs...
>> >
>> > flashfs[1]: 1 files, 1 directories
>> > flashfs[1]: 0 orphaned files, 0 orphaned directories
>> > flashfs[1]: Total bytes: 15998976
>> > flashfs[1]: Bytes used: 6434304
>> > flashfs[1]: Bytes available: 9564672
>> > flashfs[1]: flashfs fsck took 1 seconds.
>> > flashfs[1]: Initialization complete....done Initializing flashfs.
>> >
>> > POST: CPU MIC register Tests : Begin
>> > POST: CPU MIC register Tests : End, Status Passed
>> >
>> > POST: PortASIC Memory Tests : Begin
>> > POST: PortASIC Memory Tests : End, Status Passed
>> >
>> > POST: CPU MIC PortASIC interface Loopback Tests : Begin
>> > POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed
>> >
>> > POST: PortASIC RingLoopback Tests : Begin
>> > POST: PortASIC RingLoopback Tests : End, Status Passed
>> >
>> > POST: Inline Power Controller Tests : Begin
>> > POST: Inline Power Controller Tests : End, Status Passed
>> >
>> > POST: PortASIC CAM Subsystem Tests : Begin
>> > POST: PortASIC CAM Subsystem Tests : End, Status Passed
>> >
>> > POST: PortASIC Port Loopback Tests : Begin
>> > POST: PortASIC Port Loopback Tests : End, Status Passed
>> >
>> > Waiting for Port download...Complete
>> >
>> > cisco WS-C3560-48PS (PowerPC405) processor (revision N0) with
>> 118784K/12280K
>> > byt
>> > es of memory.
>> > Processor board ID FDO1132Z6AS
>> > Last reset from power-on
>> > 1 Virtual Ethernet interface
>> > 48 FastEthernet interfaces
>> > 4 Gigabit Ethernet interfaces
>> > The password-recovery mechanism is enabled.
>> >
>> > 512K bytes of flash-simulated non-volatile configuration memory.
>> > Base ethernet MAC Address : 00:1D:45:69:CD:80
>> > Motherboard assembly number : 73-9676-12
>> > Power supply part number : 341-0029-05
>> > Motherboard serial number : FDO113202PW
>> > Power supply serial number : LIT11300B61
>> > Model revision number : N0
>> > Motherboard revision number : B0
>> > Model number : WS-C3560-48PS-S
>> > System serial number : FDO1132Z6AS
>> > SFP Module assembly part number : 73-7757-03
>> > SFP Module revision Number : A0
>> > SFP Module serial number : FDO11310AM7
>> > Top Assembly Part Number : 800-25859-03
>> > Top Assembly Revision Number : J0
>> > Version ID : V04
>> > CLEI Code Number : CNMV3N0CRC
>> > Hardware Board Revision Number : 0x01
>> >
>> >
>> > Switch Ports Model SW Version SW Image
>> > ------ ----- ----- ---------- ----------
>> > * 1 52 WS-C3560-48PS 12.2(25)SEE4 C3560-IPBASE-M
>> >
>> >
>> > It hangs here and after that not going any further.
>> >
>> > Any help and inputs required.
>> >
>> > --
>> > Muhammad Nasim
>> > Network Engineer
>> > Saudi Arabia
>> >
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>>
>
>
>
> --
> Muhammad Nasim
> Network Engineer
> Saudi Arabia
>
>
-- Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc.Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: tscott@ipexpert.com
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART