Re: How I could see the VTP command that I enter in the

From: ccie champ (ccie.champ@gmail.com)
Date: Mon Jun 16 2008 - 10:35:23 ART

• Next message: Muhammad Imran Memon: "Lab Date"
• Previous message: Larry: "Re: How I could see the VTP command that I enter in the"
• Maybe in reply to: Larry: "Re: How I could see the VTP command that I enter in the"
• Next in thread: Larry: "Re: How I could see the VTP command that I enter in the"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Is it about dynamips or real hardware?

Typically these commands are there in sh run, if those are supported in
configuration but you will not be able to see if switch just supoort vlan
database.

On 6/16/08, ccie <ccie@just-horizon.com> wrote:
>
> Hi Experts,
>
>
>
> How I could see the VTP command that I enter in the running, e.g.
>
> Vtp ver e
>
> Vtp domain Cisco
>
> They disappear in the running configuration? I want to copy and paste these
> setting on the rest of the switches?
>
>
>
> Regards,
>
> Amin
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Muhammad Imran Memon: "Lab Date"
• Previous message: Larry: "Re: How I could see the VTP command that I enter in the"
• Maybe in reply to: Larry: "Re: How I could see the VTP command that I enter in the"
• Next in thread: Larry: "Re: How I could see the VTP command that I enter in the"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART