From: Arunas Baltrunas (arunas.baltrunas@gmail.com)
Date: Mon Jun 09 2008 - 03:46:43 ART
because this is Ethernet segment you should disable DIS election and
periodic CSNP flooding process
interface FastEthernet0/0.14
encapsulation dot1Q 14
isis network point-to-point
http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_is1.html#wp1014264
arunas
On 6/6/08, Lee Reade <lee.reade@binternet.com> wrote:
>
> Hi People,
>
>
>
> Long time listener, first time poster, an ISIS question that was really
> bugging me.
>
>
>
> I was presented with a question to enable ISIS between 2 devices via
> Ethernet, and also allow for the shortest possible hold time, whilst also
> not causing adverse CPU, bandwidth and memory consumption.
>
>
>
> I immediately thought of isis hello-interval minimal,
>
>
>
> But this will also have an effect on the above mentioned system resources,
> as per;
>
>
>
>
> http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_is1.html#w
> p1013844
>
>
>
> Whereas, adjusting the hello interval & multiplier manually would not meet
> either of the requirements.
>
>
>
> Can anyone comment / advise on this at all??
>
>
>
> Thanks very much!!
>
>
>
> LR
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART