From: CCIE3000 (ccie3000@googlemail.com)
Date: Sun Jun 08 2008 - 13:01:52 ART
Sorry, I should have pointed out that I've looked at the answer and still
can't fathom it.
If I was told the byte rates and told to convert to CBWFQ, no probs.
But I can't work out how they have got to the answers below.
1,2 and 6 1500
3 and 5 3000
4 4500
On 6/8/08, CCIE3000 <ccie3000@googlemail.com> wrote:
>
> R1 fa0/0 -------- fa0/0 R2
>
> Question:
>
> Configure Custom Queueing on R1 using the following policy:
>
> All traffic generated from L0 queue 1
> From R1 L0 to R2 L0 queue 2
> Telnet Q3
> HTTP Q4
> TFTP Q6
> default Q5
>
> Now, no problems configuring the queues and using debug everything is
> working a okay
>
> Task two states
>
> Q1,2 and 6 receive 10% bandwidth
> Q3 and 5 20%
> Q4 30%
>
> Now, I know that the default queue size is 1500 bytes and I know the
> commands to change them, what I can't figure out is the maths behind it.
>
> Appreciate if anyone could point me in the right direction.
> Thanks,
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART