From: CCIE3000 (ccie3000@googlemail.com)
Date: Sun Jun 08 2008 - 12:54:54 ART
Strange this, I set up a lab as you've described and it worked fine no
problems.
On 6/5/08, Roger RPF <rpf@bluemail.ch> wrote:
>
> Hi group,
>
> I have a question regarding redistribute connected. Following scenario:
>
>
> ---<R1 OSPF>----<R2 OSPF and EIGRP>----<R3 EIGRP>----
>
> The links connecting the routers are configured as network statement in the
> related protocol.
>
> On R2, if I redistribute EIGRP into OSPF, I do not see the R2-R3 link
> (EIGRP
> directly connected) in the R1 routing table. On R2 I additionally have to
> configure redistribute connected under the OSPF process.
>
> If I do the other way: On R2, redistribute OSPF into EIGRP, I can see the
> network R1-R2 (OSPF directly connected) in the routing table of R3.
>
> My question, is this default behaviour of OSPF? I need to use the
> redistribute connected in order to get the directly connected network of
> the
> other protocol (in this case EIGRP) into OSPF, even if I have configured
> this particular network in EIGRP?
>
> Would be very thankful for clarification
>
> Roger
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART