From: Roger RPF (rpf@bluemail.ch)
Date: Thu Jun 05 2008 - 14:54:48 ART
Strange stuff, but I removed the redistribute connected under the OSPF
process, performed a reload and..hurra...the RIP network was in OSPF.
I think something hanged up on this router during all the
configuration...pfff, very frustrating :o)
thank you all
Roger
-----Urspr|ngliche Nachricht-----
Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
Roger RPF
Gesendet: Donnerstag, 5. Juni 2008 16:49
An: 'Ibrahim kabir'; ccielab@groupstudy.com
Betreff: AW: redistribute connected
Well, I think they are right. Take a look below. As you can see I use
redistribute connected on OSPF in order to get the connected 150.20.12. RIP
network into OSPF....
!
interface GigabitEthernet0/0
ip address 150.20.12.2 255.255.255.0
duplex auto
speed 100
!
interface Serial0/1/0
ip address 150.20.100.2 255.255.255.224
encapsulation frame-relay
ip ospf message-digest-key 1 md5 7 060506324F41
ip ospf priority 100
frame-relay map ip 150.20.100.4 204
frame-relay map ip 150.20.100.5 205
frame-relay map ip 150.20.100.6 206
no frame-relay inverse-arp
!
router ospf 1
router-id 2.2.2.2
log-adjacency-changes
area 0 authentication message-digest
redistribute rip subnets
redistribute connected subnets
network 150.10.2.2 0.0.0.0 area 0
network 150.20.100.2 0.0.0.0 area 0
neighbor 150.20.100.4
neighbor 150.20.100.5
neighbor 150.20.100.6
!
router rip
version 2
redistribute ospf 1 metric 5
passive-interface Serial0/1/0
passive-interface Serial0/2/0
network 150.20.0.0
network 193.100.2.0
no auto-summary
!
Von: Ibrahim kabir [mailto:kebramccie@live.com]
Gesendet: Donnerstag, 5. Juni 2008 16:38
An: Roger RPF; ccielab@groupstudy.com
Betreff: RE: redistribute connected
Are you very sure your network statements are correct. coz if they are they
should be redistributed.
Kabir K Ibrahim
________________________________________
Connect to the next generation of MSN Messenger Get it now!
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:20 ART