From: Thor Kopp (thorkopp@googlemail.com)
Date: Thu May 29 2008 - 09:20:15 ART
correct if you want to use udld on copper ports, udld aggressive is your
only option.
Notes:
If you use udld enable global config this will enable udld for fibre ports
only
If you use udld aggregssive global config command this will enable
aggressive udld for fibre ports but won't enable udld on copper ports.
To enable udld for copper ports, you manually need to go onto that port and
enable using 'udld aggress'.
- Thor
On Thu, May 29, 2008 at 12:24 PM, Shawn Zandi <szmetal@gmail.com> wrote:
> enabled on Fiber ports. those are copper.
>
> On Thu, May 29, 2008 at 3:09 PM, ccie <ccie@just-horizon.com> wrote:
>
> > Hi experts,
> >
> >
> >
> > Once enabling UDLD on the global configuration mode Using
> >
> >
> >
> > SW2(config)#udld enable
> >
> >
> >
> > According to my knowledge it should be enabled on all interface, but it
> > show
> > that it hasn't been enabled on any!!!
> >
> >
> >
> > Interface Fa0/1
> >
> > ---
> >
> > Port enable administrative configuration setting: Disabled
> >
> > Port enable operational state: Disabled
> >
> > Current bidirectional state: Unknown
> >
> >
> >
> > Interface Fa0/2
> >
> > ---
> >
> > Port enable administrative configuration setting: Disabled
> >
> > Port enable operational state: Disabled
> >
> > Current bidirectional state: Unknown
> >
> >
> >
> > Interface Fa0/3
> >
> > ---
> >
> > Port enable administrative configuration setting: Disabled
> >
> > Port enable operational state: Disabled
> >
> > Current bidirectional state: Unknown
> >
> >
> >
> > Any advice about that?
> >
> >
> >
> > Regards,
> >
> > Amin
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
>
>
> --
> Shafagh Zandi,
> www.shafagh.com
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART