From: Rik Guyler (rik@guyler.net)
Date: Mon May 26 2008 - 20:47:23 ART
I know I'm not the only one that despises MD5 authentication. Seems like
there aren't too many other things in IOS-land that are as unpredictable
when it comes to doing what it is supposed to be doing.
I have SW2 and BB2 from an IE lab that are supposed to exchange RIP routes
using MD5 authentication. I've reloaded both devices, verified the configs
(yes, I cheated and looked at BB2 ;-) on both but the debugs on both sides
continuously complain about the auth. I even checked the solution guide and
my config is identical except the name of the key chain name.
key chain RIP
key 1
key-string CISCO
interface Vlan82
ip address 192.10.1.8 255.255.255.0
ip rip authentication mode md5
ip rip authentication key-chain RIP
Anybody out there have a good method for clearing this type of mess up?
-- Rik
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART