From: Thor Kopp (thorkopp@googlemail.com)
Date: Sun May 25 2008 - 10:59:32 ART
I don't believe that you can change the distance for selected routes within
eigrp, you can only change the distance for ALL external routes. The command
is there but i've never had it work.
The other options that i could think depending on the restrictions of the
questions is using a summary-address with a distance of 255, a
distribute-list or perhaps if you have multiple paths under eigrp, then use
an offset-list with delay &/or bw to favour your other path.
- Thor
On Sun, May 25, 2008 at 6:05 AM, Athaide, Dwayne <DAthaide@epco.com> wrote:
> Does the distance 255 1.1.1.1 0.0.0.0 1 command work in EIGRP or does it
> only
> work for ospf? I am trying to set an external EIGRP route 4.4.4.4 with a
> distance of 255 so it won't make it to the route table without any luck.
> The
> advertising EIGRP router is 1.1.1.1
> Thanks
>
>
> Router eigrp 100
> distance 255 1.1.1.1 0.0.0.0 1
> no auto-summary
> network 1.1.1.2 0.0.0.0
> !
> !
> access-list 1 permit 4.4.4.4
>
> Thanks
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART