Re: The max supported VWIC-2MFT on 3825?

From: Radioactive Frog (pbhatkoti@gmail.com)
Date: Sun May 25 2008 - 07:34:56 ART

• Next message: Sadiq Yakasai: "Re: RE: Dot1Q Tunneling"
• Previous message: Chris Gray: "RE: Class-map match protocol http"
• Maybe in reply to: ccie: "The max supported VWIC-2MFT on 3825?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

are all those genuine cards?

I had the same issue with counterfieted cards before.....

On Sun, May 25, 2008 at 6:10 PM, ccie <ccie@just-horizon.com> wrote:

> Dear Experts,
>
>
>
>
>
> I have Cisco 3825, with units 4 units VWIC-2MFT-E1, used for data as point
> to point link, each of these VWICs works perfectly by itself, once I load
> them all together at the same time on this router just 2 cards are working.
>
>
>
>
>
> NAME: "3825 chassis", DESCR: "3825 chassis, Hw Serial#: FCZ092870KF, Hw
> Revision: 1.0"
>
> PID: CISCO3825 , VID: V01 , SN: FCZ092870KF
>
>
>
> NAME: "c3825 Motherboard with Gigabit Ethernet", DESCR: "c3825 Motherboard
> with Gigabit Ethernet"
>
> PID: CISCO3825 , VID: V01 , SN: FOC091447CS
>
>
>
> NAME: "High Speed Wan Interface Card with 4 serial ports(HWIC-4T)", DESCR:
> "High Speed Wan Interface Card with 4 serial ports(HWIC-4T)"
>
> PID: , VID: V01 , SN: FOC09352T91
>
>
>
> NAME: "High Speed Wan Interface Card with 4 serial ports(HWIC-4T)", DESCR:
> "High Speed Wan Interface Card with 4 serial ports(HWIC-4T)"
>
> PID: , VID: V01 , SN: FOC09352T8S
>
>
>
> NAME: "WAN", DESCR: "WAN"
>
> PID: NM-2W= , VID: 1.0, SN: JAD0546044H
>
>
>
> NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
> interface daughtercard"
>
> PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212114
>
>
>
> NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
> interface daughtercard"
>
> PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212110
>
>
>
> NAME: "WAN", DESCR: "WAN"
>
> PID: NM-2W= , VID: 1.0, SN: JAD054604BP
>
>
>
> NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
> interface daughtercard"
>
> PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212113
>
>
>
> NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
> interface daughtercard"
>
> PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212118
>
>
>
>
>
> Could anybody give me some clues?
>
>
>
>
>
>
>
> Regards,
>
>
>
> Amin
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Sadiq Yakasai: "Re: RE: Dot1Q Tunneling"
• Previous message: Chris Gray: "RE: Class-map match protocol http"
• Maybe in reply to: ccie: "The max supported VWIC-2MFT on 3825?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART