From: ccie (ccie@just-horizon.com)
Date: Sun May 25 2008 - 05:10:14 ART
Dear Experts,
I have Cisco 3825, with units 4 units VWIC-2MFT-E1, used for data as point
to point link, each of these VWICs works perfectly by itself, once I load
them all together at the same time on this router just 2 cards are working.
NAME: "3825 chassis", DESCR: "3825 chassis, Hw Serial#: FCZ092870KF, Hw
Revision: 1.0"
PID: CISCO3825 , VID: V01 , SN: FCZ092870KF
NAME: "c3825 Motherboard with Gigabit Ethernet", DESCR: "c3825 Motherboard
with Gigabit Ethernet"
PID: CISCO3825 , VID: V01 , SN: FOC091447CS
NAME: "High Speed Wan Interface Card with 4 serial ports(HWIC-4T)", DESCR:
"High Speed Wan Interface Card with 4 serial ports(HWIC-4T)"
PID: , VID: V01 , SN: FOC09352T91
NAME: "High Speed Wan Interface Card with 4 serial ports(HWIC-4T)", DESCR:
"High Speed Wan Interface Card with 4 serial ports(HWIC-4T)"
PID: , VID: V01 , SN: FOC09352T8S
NAME: "WAN", DESCR: "WAN"
PID: NM-2W= , VID: 1.0, SN: JAD0546044H
NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
interface daughtercard"
PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212114
NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
interface daughtercard"
PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212110
NAME: "WAN", DESCR: "WAN"
PID: NM-2W= , VID: 1.0, SN: JAD054604BP
NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
interface daughtercard"
PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212113
NAME: "Two port E1 voice interface daughtercard", DESCR: "Two port E1 voice
interface daughtercard"
PID: VWIC-2MFT-E1= , VID: 1.0, SN: 33212118
Could anybody give me some clues?
Regards,
Amin
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART