From: Matt Bentley (mattdbentley@gmail.com)
Date: Mon May 19 2008 - 17:51:13 ART
Hi Dale:
I had read over the link, but couldn't make much of it. I found an archived
thread about this topic (
http://www.groupstudy.com/archives/ccielab/200508/msg01075.html), but it
seems to be a brief overview. Any other help would be greatly appreciated.
Thanks.
On Mon, May 19, 2008 at 4:30 PM, Dale Kling <dalek77@gmail.com> wrote:
> I'm reading over this as we type, I never really thought about it until you
> brought it up. Here's a link to the DOCCD I just found on it.
>
>
> http://www.cisco.com/en/US/docs/ios/12_4/qos/configuration/guide/h2RTplc.html
>
> regards,
>
> Dale
>
> Let me know what you make of it.
>
> On Mon, May 19, 2008 at 4:24 PM, Matt Bentley <mattdbentley@gmail.com>
> wrote:
>
>> Hi Sadiq:
>>
>> Thanks for the explanation. I understand what you said, but I still see
>> it
>> - at least from a question perspective to use the policy x y z command for
>> traffic that enters/exits an interface. Do you mean hardware-processed
>> traffic would use the police x y z command whereas CPU-processed traffic
>> uses police cir?
>>
>> Thanks again.
>>
>> On Mon, May 19, 2008 at 4:10 PM, Sadiq Yakasai <sadiqtanko@gmail.com>
>> wrote:
>>
>> > Hi Matt,
>> >
>> > police x y z command polices control plane traffic. This is traffic
>> > that terminates on a router (non transit traffic).
>> >
>> > While police cir x y z polices data plane (transit) traffic that is
>> > either coming in or going out an interface.
>> >
>> > HTH
>> > Sadiq
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART