From: Dale Kling (dalek77@gmail.com)
Date: Mon May 19 2008 - 17:30:37 ART
I'm reading over this as we type, I never really thought about it until you
brought it up. Here's a link to the DOCCD I just found on it.
http://www.cisco.com/en/US/docs/ios/12_4/qos/configuration/guide/h2RTplc.html
regards,
Dale
Let me know what you make of it.
On Mon, May 19, 2008 at 4:24 PM, Matt Bentley <mattdbentley@gmail.com>
wrote:
> Hi Sadiq:
>
> Thanks for the explanation. I understand what you said, but I still see it
> - at least from a question perspective to use the policy x y z command for
> traffic that enters/exits an interface. Do you mean hardware-processed
> traffic would use the police x y z command whereas CPU-processed traffic
> uses police cir?
>
> Thanks again.
>
> On Mon, May 19, 2008 at 4:10 PM, Sadiq Yakasai <sadiqtanko@gmail.com>
> wrote:
>
> > Hi Matt,
> >
> > police x y z command polices control plane traffic. This is traffic
> > that terminates on a router (non transit traffic).
> >
> > While police cir x y z polices data plane (transit) traffic that is
> > either coming in or going out an interface.
> >
> > HTH
> > Sadiq
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART