From: RoRo (cisconetman@gmail.com)
Date: Sat May 17 2008 - 03:51:31 ART
Based on your scenario, I would have used set community no-export, unless
your are in a confederation, then I would use set community local-as.
I would match the interface then as you did, and add the route-map to the
network stement above.
On 5/16/08, John <jgarrison1@austin.rr.com> wrote:
>
> I seem to be getting the results asked for. Is
>
> route-map path
> match int f0/0.1001
> set community local-as
>
> bgp 65145
> red conn route-map path
>
> the same as, when I say the same I mean achieve the same results.
>
> route-map path1
> set community local-as
>
> router bgp 65145
> net 174.1.1.0 mask 255.255.255.0 route-map path1
>
>
>
> The 174.1.1.0 network is attatched to f0/0.1001. I'm supposed to
> advertise
> the 174.1.1.0 network and make sure it's not advertised outside the AS
> without
> using ditribute or prefix lists. I seem to have achieved the desired
> result,
> but I'm probably missing something. I' using no other route maps anywhere
> on
> this router. any input welcome
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART