From: Carlos Trujillo (carlos.trujillo.jimenez@gmail.com)
Date: Fri May 16 2008 - 19:53:14 ART
Jhon, your config looks fine.
One thing is not mentioned in your config, did you also send the community
attribute to your neighbors?
router bgp xxx
neighbor x.x.x.x send-community
2008/5/16, John <jgarrison1@austin.rr.com>:
>
> I've gotten better at not sending out stupid stuff, but I'm not quite
> there. Consider the question rhetorical at this point.
> ----- Original Message ----- From: "John" <jgarrison1@austin.rr.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, May 16, 2008 4:01 PM
> Subject: bgp network
>
>
> I seem to be getting the results asked for. Is
>>
>> route-map path
>> match int f0/0.1001
>> set community local-as
>>
>> bgp 65145
>> red conn route-map path
>>
>> the same as, when I say the same I mean achieve the same results.
>>
>> route-map path1
>> set community local-as
>>
>> router bgp 65145
>> net 174.1.1.0 mask 255.255.255.0 route-map path1
>>
>>
>>
>> The 174.1.1.0 network is attatched to f0/0.1001. I'm supposed to
>> advertise
>> the 174.1.1.0 network and make sure it's not advertised outside the AS
>> without
>> using ditribute or prefix lists. I seem to have achieved the desired
>> result,
>> but I'm probably missing something. I' using no other route maps anywhere
>> on
>> this router. any input welcome
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART