From: itsfortarget iwillgetit (itsfortarget@gmail.com)
Date: Wed May 14 2008 - 13:42:05 ART
thats true , but am not getting sny route to rip, even am redistributing
ospf route and summarising it
On Wed, May 14, 2008 at 12:06 AM, Mike M <mike_malan@yahoo.co.uk> wrote:
> Your access list (11) has an implicit deny!
>
> Therefore you will allow 4.4.0.0/16 but no other OSPF
> routes.
>
> Cheers
> Mike M
>
> --- itsfortarget iwillgetit <itsfortarget@gmail.com>
> wrote:
>
> > Dear Expert,
> >
> > Am trying to redistribute my ospf sumnets in to RIP
> > domain.
> >
> > After redistribution am summarising ospf routes in
> > to /16 and only allowing
> > summary routes to enter RIP domain.
> >
> > But am not getting any of my ospf routes in to RIP,
> > pls find below the conf.
> > Your inputs would be appreciated.
> >
> >
> > router rip
> > version 2
> > redistribute ospf 1 metric 5
> > passive-interface default
> > network 150.1.0.0
> > neighbor 150.1.4.254
> > distribute-list 11 out FastEthernet0/1
> > distribute-list 10 in FastEthernet0/1
> >
> > Rack1_Router6#sh access-lists 11
> > Standard IP access list 11
> > 10 permit 4.4.0.0, wildcard bits 0.0.255.255
> >
> > Rack1_Router6#sh run int fa 0/1
> > !
> > interface FastEthernet0/1
> > ip address 150.1.4.6 255.255.255.0
> > ip summary-address rip 4.4.0.0 255.255.0.0
> >
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
>
>
>
>
> __________________________________________________________
> Sent from Yahoo! Mail.
> A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:16 ART