From: Amir.Tahir/Wateen/Lahore (Amir.Tahir@wateen.com)
Date: Tue May 06 2008 - 01:29:08 ART
Hi there,
Are you using actual Rack or Dynagen. Please ensure that you have not
defined peer-groups in your configurations.
In addition Whenever I had this issue I just define remote nei first and
then issue the command.
Regards
__________________
Amir Tahir
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie girl
Sent: Monday, May 05, 2008 7:25 PM
To: Cisco certification
Subject: bgp error message
Hi
Does anyone have any ideas why I keep getting this message? I can't see
what
is wrong :(
R2(config)#router bgp 200
R2(config-router)#neighbor 150.50.5.5 remote-as 200
R2(config-router)#neighbor 150.50.5.5 update-source lo 1
R2(config-router)#neighbor 150.50.5.5 route-reflector-client
*% Specify remote-as or peer-group commands first*
**
*
*Mar 1 01:41:44.651: %BGP-5-ADJCHANGE: neighbor 150.50.5.5 Up
R2(config)#router bgp 200
R2(config-router)#neighbor 150.50.5.5 route-reflector-client
% Specify remote-as or peer-group commands first
*
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:16 ART