From: Dale Kling (dalek77@gmail.com)
Date: Sun Apr 27 2008 - 13:57:28 ART
I got those too when I used Dynamips with that command. I just don't think
Dynamips can handle the processing speed that feature requires at times. I
wouldn't worry about it as long as you understand the functionality behind
that command. You'll see little buggy things like this when you use
Dynamips. Mine wouldn't stay DOWN permanently, it would flap the neighbors
every once in a while though, especially as I got further in the lab and
loaded the CPU on my PC. I would just turn it off and finish the lab if
it's flapping a lot.
regards,
Dale
On Sun, Apr 27, 2008 at 12:45 PM, Professor Ewan <professorewan@gmail.com>
wrote:
> Hi guys
>
> I am working on IE Dynamips Lab 1 3.5. When I turn on change the dead
> interval for ospf I get the following errors listed below for each of the
> routers
>
>
> R3
> interface Serial1/1
> ip address 183.1.0.3 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf dead-interval minimal hello-multiplier 3
> ip ospf priority 0
> serial restart-delay 0
> frame-relay map ip 183.1.0.4 315
> frame-relay map ip 183.1.0.5 315 broadcast
> no frame-relay inverse-arp
> end
> Rack1R3(config-if)#
> *Mar 2 00:32:50.433: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/1
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R3(config-if)#
> *Mar 2 00:33:00.005: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/1
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R3(config-if)#
> *Mar 2 00:33:04.861: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/1
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R3(conf
>
>
>
> R4
> interface Serial1/0
> ip address 183.1.0.4 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf dead-interval minimal hello-multiplier 3
> ip ospf priority 0
> serial restart-delay 0
> frame-relay map ip 183.1.0.3 405
> frame-relay map ip 183.1.0.5 405 broadcast
> no frame-relay inverse-arp
> end
> Rack1R4(config-if)#
> *Mar 2 00:32:02.285: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:06.381: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:12.429: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:15.469: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:20.333: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:28.193: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:40.753: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
>
>
> R5
> !
> interface Serial1/0
> ip address 183.1.0.5 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf dead-interval minimal hello-multiplier 3
> ip ospf priority 0
> serial restart-delay 0
> frame-relay map ip 183.1.0.3 513 broadcast
> frame-relay map ip 183.1.0.4 504 broadcast
> no frame-relay inverse-arp
> end
> Rack1R5(config-if)#
> *Mar 2 00:32:12.109: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.4.4 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> *Mar 2 00:32:12.113: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:13.165: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.4.4 on
> Serial1/0
> from INIT to DOWN, Neighbor Down: Dead timer expired
> *Mar 2 00:32:13.169: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:16.469: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:28.637: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:31.205: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
>
>
> Pass the CCIE in six weeks, Guaranteed!
> http://www.certscience.com/CCIE
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:52 ART