From: KS Anpu (ksanpu@gmail.com)
Date: Mon Apr 28 2008 - 01:02:08 ART
Hi ,
Me too facing this flapping problem , i can finish ospf some how but i
cannot finish the bgp. is there any solution to this ????
i have played with dynamips and used all possible idle pc vlaue ,,, but
still no use....( My pc is 2.2 Core2Due , 800 FSB intel board , 3 GB RAM)
Regards,
Anbu.
On Sun, Apr 27, 2008 at 10:15 PM, Professor Ewan <professorewan@gmail.com>
wrote:
> Hi guys
>
> I am working on IE Dynamips Lab 1 3.5. When I turn on change the dead
> interval for ospf I get the following errors listed below for each of the
> routers
>
>
> R3
> interface Serial1/1
> ip address 183.1.0.3 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf dead-interval minimal hello-multiplier 3
> ip ospf priority 0
> serial restart-delay 0
> frame-relay map ip 183.1.0.4 315
> frame-relay map ip 183.1.0.5 315 broadcast
> no frame-relay inverse-arp
> end
> Rack1R3(config-if)#
> *Mar 2 00:32:50.433: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/1
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R3(config-if)#
> *Mar 2 00:33:00.005: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/1
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R3(config-if)#
> *Mar 2 00:33:04.861: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/1
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R3(conf
>
>
>
> R4
> interface Serial1/0
> ip address 183.1.0.4 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf dead-interval minimal hello-multiplier 3
> ip ospf priority 0
> serial restart-delay 0
> frame-relay map ip 183.1.0.3 405
> frame-relay map ip 183.1.0.5 405 broadcast
> no frame-relay inverse-arp
> end
> Rack1R4(config-if)#
> *Mar 2 00:32:02.285: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:06.381: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:12.429: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:15.469: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:20.333: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:28.193: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R4(config-if)#
> *Mar 2 00:33:40.753: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.5.5 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
>
>
> R5
> !
> interface Serial1/0
> ip address 183.1.0.5 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf dead-interval minimal hello-multiplier 3
> ip ospf priority 0
> serial restart-delay 0
> frame-relay map ip 183.1.0.3 513 broadcast
> frame-relay map ip 183.1.0.4 504 broadcast
> no frame-relay inverse-arp
> end
> Rack1R5(config-if)#
> *Mar 2 00:32:12.109: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.4.4 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> *Mar 2 00:32:12.113: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:13.165: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.4.4 on
> Serial1/0
> from INIT to DOWN, Neighbor Down: Dead timer expired
> *Mar 2 00:32:13.169: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:16.469: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:28.637: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
> Rack1R5(config-if)#
> *Mar 2 00:32:31.205: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
> Serial1/0
> from 2WAY to DOWN, Neighbor Down: Dead timer expired
>
>
> Pass the CCIE in six weeks, Guaranteed!
> http://www.certscience.com/CCIE
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:52 ART