From: KS Anpu (ksanpu@gmail.com)
Date: Fri Apr 25 2008 - 00:28:48 ART
Yes ,currently i have used debug ip packet detail with out any
sub-command. i can use access-list to minimize it . But the reason i
asked is , i did the same work with many other configuration in
another site but it is not giving any problem when i am enabling the
debug.
Regards,
Anbu.
On Thu, Apr 24, 2008 at 7:39 PM, <adufour@metlife.com> wrote:
>
> Hello Anbu,
>
> Debugs can take quite a bit of the systems resources. I would suggest doing
> as specific a debug as possible. What type of debug are you trying? What
> info are you looking for?
>
> Also, I would suggest using the console and having the 'undebug all' command
> already in the prompt so you can press enter if your box becomes slow
> without having to wait to type it in.
>
> specific examples on a 6500 (or any router)...
>
> xxxxx#debug ip eigrp 1 1.1.1.1 255.255.255.0
>
> xxxxx#debug standby events
>
> xxxxx#debug ip packet ?
> <1-199> Access list
> <1300-2699> Access list (expanded range)
> detail Print more debugging detail
> <cr>
>
> Andre
>
>
>
>
> "KS Anpu" <ksanpu@gmail.com>
> Sent by: nobody@groupstudy.com
>
> 04/24/2008 09:53 AM
>
> Please respond to
> "KS Anpu" <ksanpu@gmail.com>
>
>
> To "Cisco certification" <ccielab@groupstudy.com>
>
> cc
>
> Subject Debug in 6500....
>
>
>
>
>
>
> Hi All,
> Here i have a problem with enabling the debug.the exact
> situation two 6509 switches are placed as Core Switches and there are
> some Access switches. i have configured only few vlans with HSRP and
> nothing else. But if i enable the debug in the 6509 it is getting
> slow. after that i cannot work normaly and it take few seconds to type
> one charactor in the command line.
> What may be the reason for this.....?
>
> Regards,
> Anbu.
>
>
> Pass the CCIE in six weeks, Guaranteed!
> http://www.certscience.com/CCIE
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> The information contained in this message may be CONFIDENTIAL and is for the
> intended addressee only. Any unauthorized use, dissemination of the
> information, or copying of this message is prohibited. If you are not the
> intended addressee, please notify the sender immediately and delete this
> message.
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:52 ART