From: John (jgarrison1@austin.rr.com)
Date: Wed Apr 23 2008 - 17:57:12 ART
To respond I had preempt for group 2 on R6 see the information in show
standby. Notice that although the priority for group 2 is higher and preempt
is on for R6 and I also played with the priorities so they do not match the
configs.
All groups have the preempt option
----- Original Message -----
From: "Jose A. Arnau" <jaral18@hotmail.com>
To: "John" <jgarrison1@austin.rr.com>; <ccielab@groupstudy.com>
Sent: Wednesday, April 23, 2008 10:47 AM
Subject: RE: HSRP
> Hi.
>
> This problem is because R6 don't have configured the preempt option. The
> preempt option must be configured in the deice that need preempt to the
> other
> (R6 in group 2 in this case). When you has started the routers, R3 has
> detected as active in all groups itself, and when the R6 has been started
> cannot preempt to R3 in group 2, because it don't have the preempt option.
>
> I also recommend you that you configured the preempt option in all groups.
>
> Regards.
>
> ----------------------------
> Jose A. Arnau
> ----------------------------
>> From: jgarrison1@austin.rr.com> To: ccielab@groupstudy.com> Subject:
>> HSRP>
> Date: Wed, 23 Apr 2008 10:26:16 -0600> > I have the following configs> >
> R3> >
> interface FastEthernet0/1> ip address 141.1.36.3 255.255.255.0> ip pim
> sparse-mode> ip igmp join-group 239.39.39.39> duplex auto> speed auto>
> standby
> 1 ip 141.1.36.1> standby 1 priority 120> standby 2 ip 141.1.36.2> standby
> 2
> preempt> > R6> > interface FastEthernet0/0> ip address 141.1.36.6
> 255.255.255.0> duplex auto> speed auto> standby 1 ip 141.1.36.1> standby 1
> preempt> standby 2 ip 141.1.36.2> standby 2 priority 130> > > This should
> make
> R3 the active router for group 1 and R6 the active router for> group 2,
> but I
> get R3 as the active router for both groups. Why is that?> > heres the
> show
> standby from R6. R3 is the active router for both groups(note> I've played
> with the priorities so their different than the configs)> >
> Rack1R6(config-if)#do sh stand> FastEthernet0/0 - Group 1> State is
> Standby> 1
> state change, last state change 00:07:16> Virtual IP address is
> 141.1.36.1>
> Active virtual MAC address is 0000.0c07.ac01> Local virtual MAC address is
> 0000.0c07.ac01 (v1 default)> Hello time 3 sec, hold time 10 sec> Next
> hello
> sent in 1.924 secs> Preemption enabled> Active router is 141.1.36.3,
> priority
> 150 (expires in 7.080 sec)> Standby router is local> Priority 100 (default
> 100)> IP redundancy name is "hsrp-Fa0/0-1" (default)> FastEthernet0/0 -
> Group
> 2> State is Standby> 1 state change, last state change 00:07:02> Virtual
> IP
> address is 141.1.36.2> Active virtual MAC address is 0000.0c07.ac02> Local
> virtual MAC address is 0000.0c07.ac02 (v1 default)> Hello time 3 sec, hold
> time 10 sec> Next hello sent in 0.808 secs> Preemption disabled> Active
> router
> is 141.1.36.3, priority 100 (expires in 7.108 sec)> Standby router is
> local>
> Priority 150 (configured 150)> IP redundancy name is "hsrp-Fa0/0-2"
> (default)>
>> > Pass the CCIE in six weeks, Guaranteed!>
>> > http://www.certscience.com/CCIE>
> _______________________________________________________________________>
> Subscription information may be found at: >
> http://www.groupstudy.com/list/CCIELab.html> > >
> _________________________________________________________________
> MSN Video.
> http://video.msn.com/?mkt=es-es
>
>
> Pass the CCIE in six weeks, Guaranteed!
> http://www.certscience.com/CCIE
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART