From: Anderson Alves (mota_anderson@hotmail.com)
Date: Sun Apr 20 2008 - 13:48:36 ART
Hi Kiran,
I had some problems too, after creating a VTP domain name and password I was
able to get this working. Also check to see if your trunk interfaces is up
and running.
This is my setup:
SW1:
SW1#sh vtp st
SW1#sh vtp status
VTP Version : 2
Configuration Revision : 1
Maximum VLANs supported locally : 256
Number of existing VLANs : 16
VTP Operating Mode : Server
VTP Domain Name : RS
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x65 0xBE 0xDA 0x0B 0x23 0x77 0xCA 0xEA
Configuration last modified by 192.1.112.11 at 3-1-02 00:03:34
Local updater ID is 192.1.20.11 on interface Vl20 (lowest numbered VLAN
interface found)
SW1#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa1/0, Fa1/1, Fa1/2, Fa1/4
Fa1/6, Fa1/8, Fa1/9, Fa1/11
Fa1/12, Fa1/13, Fa1/14,
Fa1/15
20 VLAN_20 active
25 VLAN_25 active
35 VLAN_35 active
40 VLAN_40 active Fa1/5
45 VLAN_45 active
50 VLAN_50 active
55 VLAN_55 active Fa1/3
112 VLAN_112 active
113 VLAN_113 active
124 VLAN_124 active
134 VLAN_134 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
SW1#sh interfaces trunk
Port Mode Encapsulation Status Native vlan
Fa1/7 on 802.1q trunking 1
Fa1/10 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa1/7 1-1005
Fa1/10 1-1005
Port Vlans allowed and active in management domain
Fa1/7 1,20,25,35,40,45,50,55,112-113,124,134
Fa1/10 1,20,25,35,40,45,50,55,112-113,124,134
Port Vlans in spanning tree forwarding state and not pruned
Fa1/7 1,20,25,35,40,45,50,55,112-113,124,134
Fa1/10 1,20,25,35,40,45,50,55,112-113,124,134
****************************************************************************
******
SW2#sh vtp status
VTP Version : 2
Configuration Revision : 1
Maximum VLANs supported locally : 256
Number of existing VLANs : 16
VTP Operating Mode : Client
VTP Domain Name : RS
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x65 0xBE 0xDA 0x0B 0x23 0x77 0xCA 0xEA
Configuration last modified by 192.1.112.11 at 3-1-02 00:03:34
SW2#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa1/1, Fa1/3, Fa1/5, Fa1/8
Fa1/9, Fa1/10, Fa1/11,
Fa1/12
Fa1/14, Fa1/15
20 VLAN_20 active Fa1/2
25 VLAN_25 active
35 VLAN_35 active
40 VLAN_40 active Fa1/0
45 VLAN_45 active Fa1/4
50 VLAN_50 active
55 VLAN_55 active
112 VLAN_112 active
113 VLAN_113 active
124 VLAN_124 active
134 VLAN_134 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
SW2#sh interfaces trunk
Port Mode Encapsulation Status Native vlan
Fa1/6 on 802.1q trunking 1
Fa1/7 on 802.1q trunking 1
Fa1/13 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa1/6 1-1005
Fa1/7 1-1005
Fa1/13 1-1005
Port Vlans allowed and active in management domain
Fa1/6 1,20,25,35,40,45,50,55,112-113,124,134
Fa1/7 1,20,25,35,40,45,50,55,112-113,124,134
Fa1/13 1,20,25,35,40,45,50,55,112-113,124,134
Port Vlans in spanning tree forwarding state and not pruned
Fa1/6 1,20,25,35,40,45,50,55,112-113,124,134
Fa1/7 1,20,25,35,40,45,50,55,112-113,124,134
Fa1/13 1,20,25,35,40,45,50,55,112-113,124,134
As you can see that is working properly for me.
HTH,
Anderson Mota Alves
CCIE3 #16778 (R/S, SP and Security)
Technical Instructor
http://www.netmetric-solutions.com
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART