From: KS Anpu (ksanpu@gmail.com)
Date: Sun Apr 20 2008 - 14:11:23 ART
Hi
You have to consider these things when you are facing issues with VTP.
- check the domain name and password are correct. ( Sh vtp status, Sh
vtp password)
- check proper trunking connectivity is there.(Sh int trunk)
then if you are not getting the vlans to client, try to
1. change the configuration revision number in the server by creating
a vlan and check the client (Sh vtp status ) .it will help you
OR
2. shutdown the trunk and enable the trunk link and chek.
OR
3. if there are no updater source for vtp , try to create one addr as
VTP updater source. then try to change the configuration revision
number and check the client..
Regards,
Anbu.
On Sun, Apr 20, 2008 at 10:01 PM, Kiran Parashare <kiran.ccie@gmail.com> wrote:
> Hello GS,
>
> Hello,
> I have created the VTP domain A as server and domain B as client but
> whatever vlan created on domain A not passing to client domain B.
> What could be wrong as i using IEWB for ccie.
> I am using dynagen 0.11.0 for XP. I have created the new vlan.dat file but
> server not passing the vlan info to client.
> Please suggest any changes to be made.
> Appreciate your timely help.
> Regards,
> Kiran
>
>
> Pass the CCIE in six weeks, Guaranteed!
> http://www.certscience.com/CCIE
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART