From: Moses Polalysa (moses.polalysa@gmail.com)
Date: Thu Apr 17 2008 - 22:45:50 ART
Thanks Andy.
Anyone can give an example for both filtering way?
Thanks.
-- Regards, MosesOn Thu, Apr 17, 2008 at 11:36 PM, Andy Cole <Andy.Cole@foremostfarms.com> wrote:
> > There are some cases where an access-list won't work and a pre-fix list > will. I can't remember any specific examples to point you to, but I > have run across them. I use one, and felt my config was solid but it > would not produce the results I was looking for. Then created a > prefix-list instead matching the access-list and worked fine. > > Learn to be good at both, you will NEED to use both. > > Andy > > -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > Moses Polalysa > Sent: Thursday, April 17, 2008 11:26 AM > To: Cisco certification > Subject: Can I always use access-list with distribute-list? > > Dear expert, > > Hi. Can I always use ACL with distribute-list? I mean sometimes I read > in IEWB they use prefix-list, can I assume all of distribute-list with > access-list? > > Is it give the same result between prefix-list & access-list? I know if > they need to be more complex filtering try access-list and if simple > filtering (e.g just one network) try prefix-list. But I need more simple > think by using ACL for both criterias. > > Thanks. > > -- > Regards, > Moses > > > Pass the CCIE in six weeks, Guaranteed! > http://www.certscience.com/CCIE > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
Pass the CCIE in six weeks, Guaranteed! http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART