From: Mike Haddad (mike.haddad@hotmail.com)
Date: Tue Apr 15 2008 - 03:20:04 ART
Huan,
Thanks for the subinterface note as it was new to me. As for my question is
since I am going to affect all traffic why did he nest the QOS under the class
class-default while we could have directly applied the inner policy to the
interface. In my example there was no sub-interface.
Regards,
> From: huan.pham@valuenet.com.au> To: mike.haddad@hotmail.com;
ccielab@groupstudy.com> Subject: RE: QoS Question> Date: Tue, 15 Apr 2008
15:17:47 +1000> > Hi Mike,> > You can apply the QOS_POLICY directly to the
main interface. But if you> would like to apply it to a sub-interface, you
cannot. The router will tell> you that. This is because the sub-interface by
default does not have a queue> associated with it. The work-around is to
create a parent shaping policy> which initiates a queue.> > policy-map SHAPE>
class class-default> shape average 1000000 !*** THIS IS MISSING IN YOUR
EXAMPLE ****> service-policy QOS_POLICY> > The following post is relevant to
your question. Cisco DOC has an example> explaining this, but I cannot find
the link.> > http://www.groupstudy.com/archives/ccielab/200606/msg01596.html>
> > Cheers,> > Huan> > -----Original Message-----> From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of Mike> Haddad> Sent: Tuesday, 15
April 2008 2:15 PM> To: ccielab@groupstudy.com> Subject: QoS Question> >
Hello,> > If you look at the below answer he used nested QOS. Couldn't we
just> apply> the inner policy (QoS_POlicy) directly to the interface since it
is going to> affect all traffic?> > class-map match-all HTTP> match protocol
http> class-map match-all SMTP> match protocol smtp> !> class-map match-any
PEER-TO-PEER> match protocol fasttrack> match protocol gnutella> match
protocol kazaa2> !> policy-map QOS_POLICY> class HTTP> bandwidth 2000> class
SMTP> bandwidth 1000> class PEER-TO-PEER> police cir 8000> !> policy-map
SHAPE> class class-default> service-policy QOS_POLICY> > Thanks,> >
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART