From: Loc Pham (ccie17030@yahoo.com)
Date: Mon Apr 07 2008 - 14:00:26 ART
True, but look:
1. They should not drop connectivity to my SVI (
which is btw in production ! )
2. Even if I can do it :
interface Vlan912
description Pri.VLAN Primary
ip address 10.7.6.1 255.255.254.0
private-vlan mapping 901-902
Prn-LWAPP-Sw1#pi 10.7.6.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.7.6.1, timeout is
2 seconds:
.....
Success rate is 0 percent (0/5)
Prn-LWAPP-Sw1#
You can see my problem .
--- Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
> LOC,
>
> I havent seen where you have created a mapping for
> the primary to
> secondary VLANS???
>
> You need to create that for the setup to work
> correctly. Something like this:
>
> interface Vlan912
> description Pri.VLAN Primary
> ip address 10.7.6.1 255.255.254.0
> private-vlan mapping 901 902
>
>
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_25_see/configuration/guide/swpvlan.html#wp1042526
>
> HTH
>
> Sadiq
>
____________________________________________________________________________________
You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.
http://tc.deals.yahoo.com/tc/blockbuster/text5.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART