From: Loc Pham (ccie17030@yahoo.com)
Date: Mon Apr 07 2008 - 13:38:54 ART
Here is a snip:
!
interface Vlan912
description Pri.VLAN Primary
ip address 10.7.6.1 255.255.254.0
!
!
vlan 901
name Pri.Isolate
private-vlan isolated
!
vlan 902
name Pri.Communitty
private-vlan community
!
As soon as I add this :
vlan 912
private-vlan primary
private-vlan association 901-902
Connectivity to my SVI is drop !!!
Success rate is 100 percent (5/5), round-trip
min/avg/max = 1/1/4 ms
Prn-LWAPP-Sw1(config-vlan)#
Prn-LWAPP-Sw1(config-vlan)#
Prn-LWAPP-Sw1(config-vlan)#
Prn-LWAPP-Sw1(config-vlan)#do pi 10.7.6.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.7.6.1, timeout is
2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip
min/avg/max = 1/1/1 ms
Prn-LWAPP-Sw1(config-vlan)#
Prn-LWAPP-Sw1(config-vlan)#
Prn-LWAPP-Sw1(config-vlan)#do pi 10.7.6.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.7.6.1, timeout is
2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip
min/avg/max = 1/1/4 ms
Prn-LWAPP-Sw1(config-vlan)#
Prn-LWAPP-Sw1(config-vlan)#
Prn-LWAPP-Sw1(config-vlan)#end
Prn-LWAPP-Sw1#pi 10.7.6.1
3d19h: %SYS-5-CONFIG_I: Configured from console by
itnas on console
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.7.6.1, timeout is
2 seconds:
.....
Success rate is 0 percent (0/5)
Prn-LWAPP-Sw1#
Time to call TAC ???
lP
--- Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
> Hi
>
> I have seen that work on an SVI in the past, not on
> a 6500 though, but
> on a 3560.
>
> Would be easier if you post some config and we could
> all have a look?
>
> Sadiq
>
____________________________________________________________________________________
You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.
http://tc.deals.yahoo.com/tc/blockbuster/text5.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART