Re: Please Help With Dynamips - Q6600?

From: Moazzam Daimi (daimi.moazzam@gmail.com)
Date: Wed Apr 02 2008 - 20:03:42 ART

• Next message: mohamed ouamer: "Diameter option in the spanning-tree vlan command."
• Previous message: Luca Hall: "Re: Please Help With Dynamips - Q6600?"
• Maybe in reply to: Matt Bentley: "Please Help With Dynamips - Q6600?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Matt,

I would have used the internetwork topology for dynamips with IOS suggested
in there, I believe with q6600 this topology will rock !!! idlepc values are
well calculated for it... also one can create almost all labs topologies on
it.

http://www.internetworkexpert.com/downloads/internetwork.expert.topologies.zip

~ Moazzam

Regards,
Syed Moazzam Daimi
Senior Network Engineer
SwissBank

On 4/3/08, Matt Bentley <mattdbentley@gmail.com> wrote:
>
> Hi GS:
>
> I just got a brand new Dell, with 2GB ram and Q6600 (that four cores
> running
> at 2.4GHZ each). I have checked my idlepc value, and tried Windows as
> well
> as vista. Starting 1 device runs me up to 26% CPU, and at around 4, I am
> almost at 100%. Could someone PLEASE help me with this?
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: mohamed ouamer: "Diameter option in the spanning-tree vlan command."
• Previous message: Luca Hall: "Re: Please Help With Dynamips - Q6600?"
• Maybe in reply to: Matt Bentley: "Please Help With Dynamips - Q6600?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:49 ART