RE: Need help with a 3750 Cisco switch

From: Lee Glenn (leglenn) (leglenn@cisco.com)
Date: Wed Apr 02 2008 - 14:30:37 ART

• Next message: M_A_Jones@DellTeam.com: "RE: Need help with a 3750 Cisco switch"
• Previous message: postmaster@veatchfirm.com: "Delivery Status Notification (Failure)"
• Maybe in reply to: abdul muhammed: "Need help with a 3750 Cisco switch"
• Next in thread: M_A_Jones@DellTeam.com: "RE: Need help with a 3750 Cisco switch"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

If you are using the console port to connect to the switch you might
want to check your console settings, you want 9600 baud, and no flow
control.

-Lee

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
abdul muhammed
Sent: Wednesday, April 02, 2008 12:36 PM
To: Cisco certification
Subject: Need help with a 3750 Cisco switch

Hi GS,

my 3750 switches keep showing some funny character whenever I started
the switch. every character I type result in a different characters, So
I formated the flash and load a new IOS into it using XModem command.
but the problem still persist and I suspect my Memory could be bad, Any
help please is welcome.

--
Abdul Muhammed Murtala
AMerican University of Nigeria
Lamido Zubairu way, Yola
Adamawa
+2348052001153, +2348056201237
Network Manager
MCSE,MCDBA,MCSA,OCPDBA,CCNA,CCIE Written.

• Next message: M_A_Jones@DellTeam.com: "RE: Need help with a 3750 Cisco switch"
• Previous message: postmaster@veatchfirm.com: "Delivery Status Notification (Failure)"
• Maybe in reply to: abdul muhammed: "Need help with a 3750 Cisco switch"
• Next in thread: M_A_Jones@DellTeam.com: "RE: Need help with a 3750 Cisco switch"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:49 ART