From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Tue Apr 01 2008 - 02:42:46 ART
well, assume you are sending to group of hosts but not in the same LAN as
the port-channel, i.e. you are sending all your traffic to a router, and the
router is eventually delivering it to those hosts via another interface.
MAC address is local, hence in the above scenario you use DST-ip.
If your devices are on the same segment as your port-channel, you can use
either.
HTH,
Joseph.
On Tue, Apr 1, 2008 at 5:56 AM, Athaide, Dwayne <DAthaide@eprod.com> wrote:
> On a 3560 when do I use a dst-ip v/s a dst-mac for port-channel load
> balancing. What do I need to look for in the question to use one as
> opposed to the other? Should I be looking for frames/packets
> terminology.
>
>
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:49 ART